etchall® resist gel is a water-based gel that enables
you to create your own unique
designs without using a stencil. etchall® resist gel forms a protective
barrier against etchall® etching cream or etchall® dip 'n etch.
This barrier acts as a resist preventing the surface from being etched. etchall®
resist gel can be either squeezed directly from the bottle or brushed evenly
onto glass. etchall® resist gel appears green and opaque when wet, but
dries clear. Drying time depends on thickness of application. For etchall®
resist gel instructions, go to instructions
on using etchall® resist gel. Apply etchall® resist gel to a
clean glass surface using the gel to draw a design. This design will be the
unetched portion of the glass. Use the resist gel to build a barrier
around the perimeter of the area to be etched in order to protect the rest of
the glass. Let the etchall® resist gel dry completely, and apply etchall®
etching cream as directed. Remove the etching cream according to the
directions on the bottle, and peel the dry resist gel from the surface
while holding the object under running water. Discard the used etchall®
resist gel and rinse the object again. Your design is ready!
designs without using a stencil. etchall® resist gel forms a protective
barrier against etchall® etching cream or etchall® dip 'n etch.
This barrier acts as a resist preventing the surface from being etched. etchall®
resist gel can be either squeezed directly from the bottle or brushed evenly
onto glass. etchall® resist gel appears green and opaque when wet, but
dries clear. Drying time depends on thickness of application. For etchall®
resist gel instructions, go to 
